ABS full form is Anti-lock Braking System. There is a common feature found in many cars and bikes.
It is a system that protects your tires from locking.
if your car or bike is at speed then your sliding friction will be much higher than the rolling friction. If you apply the brake at the same time, then you will not stop there and then move forward.
So at this time, you will lose control over your bike or car, and due to sudden stopping, you may also get hurt. That’s why an anti-locking braking system develops to solve this problem.
ABS works very intelligently for these types of situations. ABS has some sensors on your wheel and they find out how the speed of your vehicle is decreasing.
At the rate of speed of the vehicle, they find out what to do. If the wheels get jammed at that time, then they send the signal through the sensor and control the brake automatically. ABS apply your brakes in the form of pulses.
Your vehicle not only stops in this but stops in the best possible way, your wheels do not get jammed at all.
Due to this, your vehicles don’t skid over the road and you have complete control over the vehicles while applying the brakes.
Types of ABS
1. Single-channel ABS
In this, ABS units are only installed in the front tire, and no unit is installed in the rear wheel.
That is why if you press the brake of the rear tire, then there is no ABS in it because your vehicle stops suddenly, you can fall and you may get hurt.
EX:- Hornet, Gixer, etc.
2. Double-channel ABS
In this, the unit of ABS is fitted in the front tire as well as in the Rear tire. If you press any one brake, your vehicle will stop safely.
But if you press two brakes simultaneously, there will be a difference in speed between the front tire and the rear tire.
So in this case, ABS first decreases the speed of both tires and balance the speed of both the tires, and then applies brakes in your vehicle. And this process is very fast.
EX : – KTM, CBR, etc.